SEER CALCULATOR
SEER Calculator: Estimate Your AC Energy Savings
Thinking about a more energy-efficient air conditioner? Our SEER savings calculator gives you a quick look at how much you could save on cooling costs by upgrading to a higher SEER system. Apple AC has been helping Central Florida homeowners make smart, budget-friendly decisions since 1997, and we are happy to walk you through your results.
Try Our SEER Savings Calculator
Enter a few details about your current air conditioner and the system you are considering to see your estimated energy savings. The calculator uses your SEER rating, tonnage, cooling hours, and local electricity cost to estimate your potential savings over the life of the equipment.
What You'll Need to Get Started
- You will need your current air conditioner’s SEER rating, which is often listed on the unit’s data plate near the serial number.
- You will want the SEER rating of the new system you are comparing against.
- Have your home’s square footage and system tonnage ready for a more accurate estimate.
- Check your utility bill for your electricity cost per kilowatt hour.
You could save about
$0
- Saved the first year
- $0
- Saved per month, on average
- $0
- Less electricity for cooling
- 0%
- System size used
- 0 tons
See how we got these numbers
These are estimates to help you compare options. Your actual savings depend on your home, your ductwork, how you set your thermostat, and the installation. Our team can give you exact numbers during a free in-home visit.
What Is a SEER Rating?
SEER stands for Seasonal Energy Efficiency Ratio, and it measures your air conditioner’s energy efficiency across a full cooling season. The rating compares the cooling the system produces against the electricity it uses. A higher SEER means the unit delivers the same cooling while pulling less energy, which shows up as lower energy costs on your monthly bill. A heat pump carries a SEER rating too, so the same comparison applies.
Older air conditioning systems often carry a rating of 10 or below, while newer energy-efficient HVAC equipment can reach into the high teens and beyond. Knowing your current rating is the first step toward understanding your potential savings.
How the SEER Savings Calculator Works
Our energy savings calculator does the heavy lifting for you. Once you plug in your numbers, the tool estimates your annual cooling costs and compares them against a new air conditioner with a higher SEER rating. The results show your estimated energy savings for the first year and over the life of the system.
The calculator factors in your cooling season usage patterns, your electricity cost per kilowatt hour, and the size of your equipment. Keep in mind these are savings estimates meant to guide your decision. Your actual savings depend on your home, your usage, and the specifics of the installation.
The Numbers Behind Your Results
- Your tonnage and square footage help size the cooling load for your home.
- Your current SEER rating and the new system’s rating set the efficiency comparison.
- Your electricity cost per kilowatt hour reflects what you actually pay your utility.
- Your cooling hours account for Central Florida’s long cooling season.
Why a Higher SEER Rating Matters
A higher SEER air conditioner uses less electricity to keep your home comfortable, which means real cost savings year after year. In Central Florida, where air conditioning runs for much of the year, even a modest jump in a unit’s energy efficiency can add up quickly. Beyond the savings, higher SEER systems tend to hold temperature and humidity more evenly, so your home feels more comfortable.
Efficiency tiers give you options at different price points. Our team helps you weigh the upfront cost of a new system against the long-term energy savings so you land on the right fit for your home and your budget.
Understanding SEER2 and Testing Standards
In 2023, the Department of Energy updated the testing standard for cooling equipment and introduced SEER2. The newer testing procedure measures systems under higher external static pressure, which better reflects real-world installations that include ductwork and an air handler. Because of that change, SEER2 numbers run a little lower than the old SEER numbers for the same equipment, so be sure to compare ratings on the same scale when you shop.
Every new air conditioner sold today has to meet minimum requirements set by the Department of Energy, and those minimums vary by region. Our NATE-certified technicians can explain what those numbers mean for your home and help you pick a system that meets or beats the standard.
Since 1997, Apple AC Has Helped Central Florida Homeowners Lower Their Energy Costs
Pete Lattner started Apple AC with a straightforward idea: do the job right, treat people fairly, and show up when they need you. More than 30 years later, that is still how we operate. We are a family-owned HVAC company with roots in Winter Garden and the surrounding communities. Our technicians live and work in the same neighborhoods they serve.
When it comes time to upgrade to a more efficient system, we take the time to understand your budget, your comfort levels, and your home’s energy consumption before we make a recommendation. You get honest guidance, with no pressure and no sales targets.
We Employ NATE-Certified Technicians
Apple AC goes beyond the minimum to make sure every technician on our team is truly qualified. Each of our techs earns certification through the North American Technician Excellence (NATE) program, the highest standard in the HVAC industry.
That certification means the person helping you choose a more efficient system has the technical skills and hands-on experience to guide you well.
- Our technicians run accurate diagnostics on all makes, models, and ages of HVAC equipment.
- Every recommendation is backed by NATE certification and ongoing training.
- We give honest assessments with no pressure and no upselling.
- Our team understands electrical components, wiring, and temperature control systems.
- We work across residential, commercial, and refrigeration systems.
From Our Family to Yours
Apple AC started as a family business, and that is exactly what it still is today. Three generations deep in this industry, we show up for our neighbors the same way we would show up for family. Take a look at what some of our Central Florida customers have to say.
HEAR FROM OUR HAPPY CUSTOMERS
Flexible Financing Options
A new AC installation is a real investment. If you would rather spread payments out over time, we have partnered with trusted lenders to make flexible financing available for qualifying customers. No hidden fees, upfront pricing, and options that fit your budget.
Frequently Asked Questions
We know that comparing efficiency ratings and cooling costs can get confusing. That is why we are here to help you make sense of your results. For HVAC definitions and common terms, take a look at our HVAC glossary.
For a climate with a long cooling season like ours, a rating in the high teens or higher usually pays off over time. Our team can help you compare efficiency tiers and find the sweet spot between upfront cost and long-term energy savings.
The calculator gives you solid savings estimates based on the numbers you enter, so it is a great starting point. Your actual savings depend on your home, your usage patterns, and the details of the installation, which is why we always follow up with an in-home evaluation.
You can usually find the rating on the data plate attached to the outdoor unit, often near the model and serial number. If you cannot track it down, one of our technicians can identify it for you during a visit.
Yes. A higher SEER air conditioner uses less electricity to deliver the same cooling, so you spend less on energy over the life of the system. The longer your cooling season, the more those savings add up.
SEER2 is the updated rating that took effect in 2023. It uses a testing procedure with higher external static pressure to better reflect real-world installations, so SEER2 numbers tend to read slightly lower than older SEER numbers for the same equipment.
Yes. A heat pump carries a SEER rating for its cooling performance, just like a standard air conditioner, so you can use the same calculator to compare potential savings.
Have another question not listed here?
Request for a Proposal
Ready to upgrade to a more efficient system? Fill out the form below and one of our team members will reach out to talk through your options, answer your questions, and schedule a free in-home estimate at a time that works for you.